Key Considerations Before Buying Best Pex crimp tool

The best Pex crimping tool is the one that is right for the job. It must be the right length and size for the job and have features that make it easy and convenient to use. There are slight variations in the features of different models. The variations can make a big difference in how well the Pex tool works on the job you need to do as well as how easy or difficult it is to use. Here is everything you need to know to find the right Pex crimping tool.

Tool Length
Pex tools come in different lengths. Some pipes are in hard to reach places and they might require a long handled Pex crimp tool just to reach them. If the pipes are closer, one with a shorter handle might be best. If the handle is too long it can make it difficult to maneuver the tool in tight places. Determine your specific needs for handle length and buy the tool that suits the job.

Crimping Clasp Size
Pex crimping tools come in different sized crimping clasps. The range is between 1/4 inch to 1 inch. The size of the Pex crimping tool clasp must be the right size to fit around the diameter of the Pex pipe that you will be working with.

Pex tools tend to become stretched out if you do a lot of pipe installation. This will make it harder to secure the crimp clasps onto the pipes. This is why you should buy a Pex crimping tool that allows you to calibrate the tool so it will fit onto the pipes securely.

Go/No-Go Gauge
This is a feature that is useful for helping you know if your Pex tool will do the job on the size of pipe and crimp you’re working with. The Go/No Go Gauge can save you time and frustration but not all Pex crimping tools come with this feature. It’s good to have one that does.

An easy to use model
Before you decide on a Pex Crimping Tool, make sure that it is a model that has the features that you want and need, but is not one of the more difficult to use. A straightforward and simple tool is all that you need to do a variety of Pex plumbing tasks.

Frequently Asked Questions (FAQs)
1. Question: How difficult is this to use to clamp on the fitting?
Answer: To fully clamp down the tool, there is a moderate amount of force required. Most Pex crimp tools require both hands to get a solid crimp. It doesn’t require an extraordinary amount of hand strength though.

2. Question: does this works for polybutylene pipe?
Answer: It can work for this type of piping, but it’s an older type that dates back to the ’90s, so it’s recommended to switch over to Pex.

3. Question: Can this tool remove copper rings?
Answer: Only Pex tools designated for use with copper clamps can remove copper rings. Those that are made for stainless steel will not remove the copper types.

4. Question: Is copper or stainless steel better?
Answer: One is not better than the other. It’s a matter of preference. Copper crimp bands have a larger crimped area so they might provide extra holding power. Stainless steel is more durable, so it’s a wash when it comes to assessing which one is better.

5. Question: Are there shorter Pex crimp tools for getting into tight places?
Answer: Yes, there are tools made with shorter handles that are recommended for using Pex piping in cramped or tight spaces.

Final Verdict
It’s not difficult to find the best Pex crimp tool when you know what you should look for.
The best choice is go to: